Overview
Panel builders and electrical contractors consistently face the challenge of fitting reliable power into limited DIN rail space. The BrightLink HDR-60-24 compatible DIN rail power supply solves this with a half-module width of just 54.5mm, delivering 60W of clean 24V DC power from a standard TS35 rail — making it the go-to choice for control cabinets where every millimeter counts.
Key Features
- Space-Saving Half-Module Design — Only 54.5mm wide on 35mm DIN rail (TS35/7.5 or TS35/15), leaving maximum room for other components in crowded control panels
- 60W 24V DC Output — Delivers 2.5A continuous current with tight voltage regulation (±2%) for powering PLCs, sensors, relays, and 24V LED drivers
- Wide Input Voltage Compatibility — Accepts 85-264VAC and 120-370VDC, suitable for both AC mains and DC bus powered installations
- 3kV AC Isolation — High dielectric strength between input and output ensures safety in industrial environments with noisy or unstable power grids
- Built-In Protection Circuitry — Over-voltage, over-current, and over-temperature protection with hiccup mode auto-recovery — no fuse replacement needed after fault clearing
- Global Certification Coverage — UL, TUV, CE, CB, BSMI, BIS, and EAC approved for deployment in virtually any market worldwide
Technical Specifications
| Model | BL-HDR60-24 (HDR-60-24 Compatible) |
| Output Power | 60W |
| Output Voltage | 24V DC (adjustable ±2%) |
| Output Current | 0 ~ 2.5A |
| Input Voltage Range | 85 ~ 264VAC / 120 ~ 370VDC |
| Frequency Range | 47 ~ 63Hz |
| Inrush Current | Cold start <30A at 230VAC |
| Efficiency | 88.5% (at 230VAC, full load) |
| Ripple & Noise | ≤200mV p-p |
| Dimensions (W×H×D) | 54.5 × 90 × 52.5mm |
| Weight | 280g |
| DIN Rail | TS35/7.5 or TS35/15 (EN 60715) |
| Protection | OCP / OVP / OTP (hiccup mode, auto recovery) |
| Isolation | 3kV AC (input-output), 1kV AC (input-ground) |
| Operating Temp | -30°C to +70°C (derate above 50°C) |
| Cooling | Free air convection |
| Safety Certifications | UL, TUV, CE, CB, BSMI, BIS, EAC |
| MTBF | >100,000 hours |
Applications
- PLC & Automation Control Panels — Powers Siemens S7, Allen-Bradley, and Mitsubishi PLCs along with distributed I/O modules in manufacturing lines
- Building Management Systems — Provides 24V DC for HVAC controllers, BACnet gateways, and lighting control modules in commercial buildings
- 24V LED Lighting Circuits — Drives short runs of 24V LED strips and small LED fixtures in retail displays and architectural accent lighting
- Security System Power — Supplies alarm panels, access control boards, and PoE switches in security installations
- Test & Measurement Equipment — Clean DC power source for bench instruments and calibration equipment
Installation Notes
Simply snap the unit onto a standard 35mm DIN rail (TS35/7.5 or TS35/15). No tools required for mounting. Ensure 20mm clearance above and below the unit for ventilation. When operating above 50°C ambient, derate output by 2.5% per °C. For parallel redundancy, add an optional diode module.
Why Choose BrightLink
BrightLink manufactures this HDR-60-24 compatible DIN rail power supply with the same compact form factor and electrical performance as the original, at a fraction of the cost. Our direct-from-manufacturer model eliminates middleman markups, delivering genuine value for panel builders and system integrators. Every unit ships with full certifications (UL, CE, TUV) and is backed by our 3-year warranty. Volume discounts available for OEM panel builds — request a quote today.
Reviews
There are no reviews yet.