480W 24V IP67 LED Driver — Mean Well HLG-480H Compatible
The flagship of the HLG-compatible family — 480W of continuous 24V output in a single IP67-rated aluminum enclosure. Designed for mega-scale outdoor LED installations where minimizing the number of drivers reduces installation labor, mounting hardware, and long-term maintenance costs. When one HLG-480H-compatible unit can replace three smaller drivers, the total cost of ownership drops dramatically even before accounting for the lower unit cost.
Key Features
- 480W / 20A output — The highest-capacity single-unit 24V IP67 driver available, powering entire building facades or long highway lighting runs from one point
- 95.5% efficiency — At this power level, even 1% efficiency improvement translates to hundreds of kWh saved annually across a multi-unit installation
- 3-in-1 dimming + smart timer ready — Integrate with photocells, astronomical timers, or city-wide lighting management systems via the standard dimming interface
- 6kV / 10kV surge options — Built-in or external SPD configurations handle the most severe surge environments including coastal and high-altitude installations
- Parallel operation — Multiple units can be paralleled for redundant N+1 configurations in mission-critical architectural lighting
- 5-year warranty — Backed by 100% factory burn-in testing at full load for 8 hours before shipment
Technical Specifications
| Parameter | Value |
|---|---|
| Output Power | 480W (24V / 20A) |
| Input Voltage | 90-305VAC / 127-431VDC |
| Efficiency | 95.5% typical |
| Power Factor | >0.99 |
| Dimming | 3-in-1: 1-10V / PWM / Resistance |
| IP Rating | IP67 |
| Surge Protection | 6kV diff / 10kV common mode (with SPD) |
| Protection | OCP, OVP, OTP, short-circuit |
| Operating Temp | -40°C to +80°C |
| Dimensions | 275 × 85 × 55 mm |
| Weight | 1800g |
| Certifications | CE, CB, EAC, UL8750, FCC Class B |
| Warranty | 5 years |
| Mean Well Equivalent | HLG-480H-24A |
Applications
- Large building facade LED media walls
- Highway and bridge illumination systems
- Amphitheater and outdoor venue stage lighting
- Port and logistics hub LED high-mast lighting
- Theme park and entertainment complex decorative lighting
Installation Notes
Due to the 1.8kg weight, mount using all 4 integrated M5 mounting tabs with stainless steel hardware — do not rely on adhesive or single-point mounting. For 20A output connections, use minimum 10 AWG (6mm²) wire with crimp terminals. When installing multiple units in parallel for N+1 redundancy, use the optional current-sharing cable to ensure balanced load distribution. Provide 30mm clearance on all sides for convection cooling.
Why Choose BrightLink
Our 480W HLG-compatible driver replaces Mean Well HLG-480H at 35% savings with identical electrical specifications and mounting dimensions. Each unit ships with a full test certificate including efficiency curve, output regulation, and Hi-Pot test results. Project value for government and infrastructure tenders — contact us for quotation.
Reviews
There are no reviews yet.