LED Power Supply – 240W 24V DIN Rail Mean Well NDR-240-24 Compatible

BrightLink 240W 24V DIN Rail Power Supply — NDR-240 Series Compatible

Industrial control panels demand power supplies that deliver high current in a standardized DIN-rail form factor — and that’s exactly what the BrightLink BL-NDR240 delivers. Outputting a robust 24VDC at 10A (240W) from a TS-35 DIN rail mount, this power supply replaces the Mean Well NDR-240-24 in automation cabinets, PLC systems, and industrial LED lighting control panels.

What sets the NDR series apart from enclosed power supplies is the standardized mounting: it clips directly onto 35mm DIN rails (TS-35/7.5 or TS-35/15) without tools, enabling rapid installation and field replacement. The vertical form factor maximizes cabinet space efficiency, leaving room for breakers, contactors, and other DIN-mounted devices alongside the power supply.

Key Features & Benefits

• 240W at 24VDC — 10A Output — Delivers substantial current for driving multiple 24V LED strip zones, relay modules, and sensor networks simultaneously from a single power supply.
• Standard TS-35 DIN Rail Mount — Snap-on installation onto 35mm DIN rails (both 7.5mm and 15mm rail profiles) requires no screws or tools — just clip and go. Field replacement takes seconds.
• 88.5% Efficiency — High conversion efficiency minimizes heat buildup inside sealed control enclosures, reducing the need for additional cooling fans or ventilation.
• Quad Protection System — Short circuit, overload, overvoltage, and over-temperature protections work together to safeguard both the power supply and connected equipment. All protections feature automatic recovery.
• Wide 90-264VAC Input — Compatible with single-phase AC inputs worldwide. Handles both 110VAC (US/Japan) and 230VAC (Europe/Asia) mains without manual voltage selector switches.
• LED Power Indicator — Front-panel green LED provides instant visual confirmation of power status, speeding up troubleshooting during maintenance and commissioning.

Technical Specifications

Typical Applications

• Industrial LED Lighting Control Panels — Powers 24V LED strip zones, DALI/DMX controllers, and relay modules inside centralized lighting control cabinets in factories and warehouses.
• PLC & Automation Systems — Provides stable 24VDC for programmable logic controllers, HMI panels, I/O modules, and field instruments in manufacturing automation.
• Building Management Systems — Supplies power for BMS controllers, sensor networks, and actuator interfaces in commercial HVAC and lighting management installations.
• Security & Access Control — Powers multiple 24V CCTV cameras, card readers, electric locks, and alarm panels from a single centralized DIN-rail supply.
• Machine Vision & Inspection — Delivers clean, regulated 24VDC for industrial LED inspection lights and machine vision illumination systems on production lines.

Installation Notes

Clip the BL-NDR240 onto a standard 35mm DIN rail using the integrated spring-loaded mounting bracket. No tools required for installation. Connect AC input to the front terminal block (L1/L/N/PE). Output 24VDC connects via the output terminal block (+V/-V). For parallel operation, consult the manual for load-sharing resistor requirements. When mounting multiple units side by side, maintain 20mm spacing between units for adequate cooling airflow.

Why Choose BrightLink?

BrightLink understands that industrial customers need power supplies that work reliably for years inside sealed cabinets with minimal maintenance. Our BL-NDR240 is built with industrial-grade components — including Japanese-brand electrolytic capacitors and toroidal power transformers — for extended operational life at high ambient temperatures. Every unit ships with a full test report documenting output voltage accuracy, ripple measurement, and hi-pot test results. We maintain safety certifications (UL, TUV, CE) that satisfy the most demanding industrial compliance audits. Contact us for OEM branding, custom output voltages, and volume project.