RGB LED Strip Light — 60 LEDs/m, IP65 Silicone-Coated Waterproof, 5m Reel
Bring vibrant color to outdoor and wet-location installations with this IP65-rated RGB LED strip. Each meter packs 60 individually addressable SMD 5050 tri-color LEDs behind a crystal-clear silicone coating that seals out rain, snow, dust, and salt spray — without dimming the output or shifting the color mix. Whether you are outlining a patio pergola, illuminating a boat deck, or adding dynamic color to a restaurant facade, this strip delivers professional results that last seasons after season.
Key Features
- IP65 Silicone Coating — A transparent nano-silicone layer encapsulates the entire strip, providing water and dust protection while maintaining full brightness and color mixing. Unlike epoxy coatings, silicone remains flexible in cold weather and resists UV yellowing for years of outdoor exposure.
- 60 High-Brightness RGB LEDs per Meter — 300 LEDs across the 5-meter reel deliver vivid color saturation even in ambient-lit environments. The 3-in-1 RGB chip architecture ensures smooth color blending with no visible color separation at normal viewing distances.
- 12V DC Safe Low Voltage — Operates on 12V DC for safe installation in wet locations without shock hazard. Compatible with all standard RGB controllers and the BrightLink WiFi/Bluetooth smart controller ecosystem.
- Flexible & Cuttable — Cut every 50mm (at marked scissors lines) for precise fit around corners, curves, and architectural details. Minimum bend radius of 20mm. The 2oz copper PCB dissipates heat efficiently, allowing continuous operation at full white without thermal throttling.
Technical Specifications
| Parameter | Value |
|---|---|
| LED Type | SMD 5050 RGB (3-in-1) |
| LED Density | 60 LEDs/meter (300 per 5m reel) |
| Input Voltage | 12V DC |
| Power Consumption | 14.4W/meter (72W per 5m reel) |
| IP Rating | IP65 (silicone coated, top and sides) |
| PCB Width | 10mm |
| Cut Interval | Every 50mm (3 LEDs) |
| Reel Length | 5 meters |
| Beam Angle | 120 degrees |
| Color Mixing | RGB additive mixing (16.7M colors with controller) |
| Dimming | PWM per channel (R/G/B) |
| Adhesive | 3M VHB double-sided tape |
| Operating Temperature | -20C to +60C ambient |
Applications
- Outdoor patio, deck, and pergola accent lighting
- Marine and RV lighting (boat gunwales, cockpit lighting, awning strips)
- Restaurant and bar facade color-changing illumination
- Garden pathway and fence line highlighting
- Entertainment rooms and gaming setups with dynamic color scenes
System Requirements
Requires a 12V DC power supply rated for at least 90W (125% of 72W strip load) and an RGB controller (sold separately). BrightLink recommends the BL-RGB-200 WiFi controller for smartphone app control or the BL-DMX-4CH for professional DMX integration. Use our 10-pack solderless RGB connectors for tool-free segment joining.
BrightLink Quality
Each reel undergoes 100% electrical and visual inspection at our ISO 9001 facility. Silicone coating adhesion is tested per IPC-TM-650. 2-year warranty covers LED failure and silicone delamination under normal outdoor use.
Reviews
There are no reviews yet.